Spiral heat exchangers are widely used in the chemical, pharmaceutical, and food processing industries due to their compact structure and efficient heat transfer. However, without proper daily care, their performance may gradually deteriorate or even lead to failure. Therefore, regular maintenance and proper operation are crucial.
Cleaning and scaling prevention are top priorities. The heat transfer surfaces of spiral heat exchangers are susceptible to reduced efficiency due to impurities and scaling in the media. It is recommended to regularly check the flow rate and media composition within the tubes based on operating conditions. If scaling is detected, chemical cleaning or high-pressure water flushing can be used. For media prone to crystallization, the temperature and concentration must be controlled, and filters should be installed as necessary to prevent particulate deposition.
Sealing and pressure testing are essential. Regularly check the sealing of the heat exchanger's flanges, gaskets, and spiral channels to prevent leaks. Avoid overpressure or overtemperature during operation. It is recommended to install pressure gauges and temperature sensors to monitor operating parameters in real time. If abnormal vibration or noise is detected, promptly investigate whether it is caused by internal structural deformation or loose supports.
Lubrication and component maintenance are also critical. If the equipment has rotating parts (such as cleaning devices), lubricate them regularly to ensure smooth and reliable operation. Before long-term outages, drain any residual media and apply an inert gas blanket to prevent corrosion.
Integrate record-keeping with professional maintenance. Keep a detailed operating log, documenting each maintenance session, cleaning method, and parameter changes, to provide a basis for subsequent optimization. For complex issues, contact the manufacturer or a professional team for an in-depth inspection.
Through effective daily care, spiral heat exchangers can maintain efficient and stable operation over the long term, significantly extending their service life and reducing energy consumption.






