High Efficiency Heat Exchanger – Spiral Plate Heat Exchanger

Jul 27, 2026 Leave a message

Introduction to Spiral Plate Heat Exchanger

The spiral plate heat exchanger (spiral heat exchanger) is a type of high-efficiency heat transfer equipment widely used in chemical, pharmaceutical, food processing, heating and other industries.

Due to its unique spiral channel structure, the spiral plate heat exchanger has advantages such as high heat transfer efficiency, compact structure, good sealing performance, and low fouling tendency.

 

Basic Characteristics of Spiral Plate Heat Exchanger

 

info-1550-1284
Brief Introduction to the Manufacturing Process of Spiral Plate Heat Exchanger

A spiral heat exchanger is usually manufactured by rolling two or four steel plates into a spiral shape.

Because the steel plates are rolled into a spiral shape, they are called spiral plates. These two or four steel plates finally form the spiral body of the spiral plate heat exchanger.

The manufacturing process requires special rolling equipment, which is usually called a rolling machine.

The rolling machine is equipped with a pair of separable semi-circular rollers. During manufacturing, many distance studs need to be welded onto the spiral plates.

After the distance studs are welded onto the two spiral plates, a steel plate with a width equal to the diameter of the semi-circular roller is used to connect the two spiral plates. This steel plate is called the center partition plate.

Then the complete spiral body is rolled on the special rolling machine to form the spiral exchanger.

After the spiral body is completed, the end surfaces need to be sealed by welding.

The purpose of end sealing is to form closed flow channels and ensure that the fluids flow inside independent channels without leakage or mixing.

Currently, the sealing methods mainly include edge forming or inserting strips followed by welding.

After manufacturing, the fluid flows through the spiral channels. The inlet and outlet connections are located at the end of the spiral plate and the semi-circular section.

If one side channel uses the semi-circular connection as the inlet and the spiral end connection as the outlet, the other side channel uses the opposite arrangement.

This creates the optimal counter-current flow pattern for heat transfer.

info-1092-1318

 

Advantages of Spiral Plate Heat Exchanger

Higher Heat Transfer Efficiency

The curved spiral channels and distance studs inside the spiral flow heat exchanger help increase fluid turbulence, which improves the heat transfer coefficient.

Under the same operating conditions, the heat transfer coefficient of a spiral plate heat exchanger is approximately 2–3 times higher than that of a shell and tube heat exchanger.

Self-Cleaning Effect

The fluid velocity inside the single channel increases when passing through areas where impurities may accumulate.

The increased velocity helps remove deposits and provides a self-cleaning effect.

Therefore, the spiral type heat exchanger is suitable for applications where fouling resistance is important.

Excellent Sealing Performance

The non-removable structure of a welded spiral heat exchanger provides excellent sealing performance.

It is suitable for heat transfer applications involving toxic, flammable, explosive, or valuable fluids.

Pure Counter-Current Flow

The fluids in adjacent channels flow in a pure counter-current direction.

This provides the maximum logarithmic mean temperature difference and improves heat transfer performance under small temperature differences.

It is especially suitable for low-temperature heat recovery applications.

Meanwhile, because the flow channel of the spiral plate heat exchanger is relatively long, the temperature control of the medium is more accurate.

Compact Structure

The structure of the spiral exchanger is compact.

The heat transfer area per unit volume can reach approximately 150 m².

Low Thermal Stress

Because the spiral flow channel itself has flexibility, it allows free thermal expansion.

Therefore, thermal stress caused by temperature differences is reduced.

 

Disadvantages of Spiral Plate Heat Exchanger

1. Channel Blockage Problem

Although the spiral heat exchanger has a self-cleaning effect, blockage may still occur due to improper design or operation.

For example:

  • Large amounts of fibers may become entangled around the distance studs.
  • The medium may solidify during start-up or shutdown.
  • The fluid may contain high amounts of solid particles and have high viscosity.

These situations may cause channel blockage.

Even when using a removable structure, mechanical cleaning can still be difficult. In severe cases, the equipment may need to be replaced.

2. Difficult Maintenance

The biggest disadvantage of the spiral plate exchanger is that maintenance is relatively difficult.

If the inner spiral plate is damaged, the whole equipment may need to be replaced.

3. Limited Pressure Capacity

Due to the limitation of steel plate strength, the pressure capacity of a spiral heat exchanger is usually lower than some other heat exchanger types.

This also limits the development of very large spiral heat exchangers.

Types of Spiral Heat Exchanger

According to different designs, spiral heat exchangers can be classified as follows:

According to maintenance method:

● Removable spiral plate heat exchanger

● Non-removable spiral plate heat exchanger

According to fluid flow pattern:

● Fully spiral flow type

● One side spiral flow and one side axial flow type

According to material:

● Carbon steel spiral heat exchanger

● Stainless steel spiral heat exchanger

● Titanium spiral heat exchanger

According to installation:

● Horizontal spiral heat exchanger

● Vertical spiral heat exchanger

● Rotatable spiral heat exchanger

 

Selection of Spiral Plate Heat Exchanger

 

The application range of the spiral plate heat exchanger is very wide.

  • It is widely used in:
  • Chemical industry
  • Pharmaceutical industry
  • Food industry
  • Heating systems
  • Energy recovery applications
1. Model and Basic Parameters

The model of the spiral plate heat exchanger represents its basic parameters.

When selecting a spiral heat exchanger, once the model is determined, the basic design parameters are also confirmed.

2. Unsuitable Applications

Some fluids are not suitable for spiral heat exchangers.

For example:

  • Fluids containing fibers
  • Fluids that easily condense or solidify

These applications should be carefully evaluated before selection.

3. Operation Recommendations

During operation:

  • Avoid long-term pressure on only one channel.
  • Avoid excessive pressure difference between two channels.
  • When starting, open the low-pressure side first, then the high-pressure side.
  • When stopping, close the high-pressure side first, then the low-pressure side.
  • Prevent fibers and foreign materials from entering the equipment.

About Suzhou Ukada Energy Saving Technology Co., Ltd.

 

Suzhou Ukada Energy Saving Technology Co., Ltd. specializes in the design and manufacturing of heat exchangers.

With professional experience in spiral heat exchanger manufacturing, we focus on solving difficult heat transfer problems and providing customized solutions for customers.